Navigate to > User Management (or Config Panel > Advanced Mode > Management depending on firmware).
Connect your computer to one of the LAN ports on the
192.168.1.50 (or 192.168.131.50 for newer firmware) Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.1 (or 192.168.131.1 ) Step 3: Access the Web Graphical User Interface (GUI) Open a modern web browser (e.g., Chrome, Edge, Firefox).
Do not use password , 12345678 , or vsol2024 . Cybercriminals scan for default credentials on GPON devices.
hole on the device, insert a pin for 10–15 seconds while the unit is powered on, and wait for the lights to flash. This will restore the factory default settings.
V-SOL V2802GW Admin Password Guide: Top Ways to Log In and Reset
Locate the small, recessed (Reset) hole on the side or back panel of the device.
Navigate to > User Management (or Config Panel > Advanced Mode > Management depending on firmware).
Connect your computer to one of the LAN ports on the
192.168.1.50 (or 192.168.131.50 for newer firmware) Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.1 (or 192.168.131.1 ) Step 3: Access the Web Graphical User Interface (GUI) Open a modern web browser (e.g., Chrome, Edge, Firefox).
Do not use password , 12345678 , or vsol2024 . Cybercriminals scan for default credentials on GPON devices.
hole on the device, insert a pin for 10–15 seconds while the unit is powered on, and wait for the lights to flash. This will restore the factory default settings.
V-SOL V2802GW Admin Password Guide: Top Ways to Log In and Reset
Locate the small, recessed (Reset) hole on the side or back panel of the device.
