Thyssenkrupp Levant Stair Lift Installation Manual Jun 2026

The Levant is designed to require . However, regular care can extend its lifespan and ensure safe operation.

Based on the installation manual, the following recommendations are made:

Immediately re-fasten the heavy-duty mechanical end-stop blocks at both ends of the rail. This prevents the carriage from accidentally running off the track during installation or troubleshooting. Step 3: Mounting and Adjusting the Seat

Setting up the 24V DC charging system at the top and bottom of the track. thyssenkrupp levant stair lift installation manual

Determine if the stairs are made of wood, concrete, or metal, as this dictates the type of fasteners required for the rail brackets. 2. Unboxing and Component Identification

Every page of the manual repeats critical warnings. Here are the non-negotiables:

: In the event of power failure, a manual release mechanism can be used to disengage the motor and move the lift [13]. The Levant is designed to require

The motorized drive unit and main chassis.

Switch the main power key or toggle switch on the chassis to the "ON" position.

⚠️ Do not use a manual for a different model (e.g., ThyssenKrupp Flow). Wiring schematics and rail brackets differ significantly. This prevents the carriage from accidentally running off

Check the tightness of all mounting bracket screws on the stairs.

The is a specialized straight-flight accessibility solution known for its compact design and reliable performance. While professional installation is highly recommended to ensure compliance with safety standards like BS EN 81-40 , the following guide provides a comprehensive overview based on the official installation manual and technical specifications. 1. Pre-Installation Preparation