Once securely attached, check your work one last time. If your Equatech mount is a tilting model, you can carefully loosen the side tension knobs on the bracket arms by hand, adjust the screen down to reduce glare, and retighten the knobs.
Drill pilot holes into the wall at the marked stud locations. Use a drill bit that's slightly smaller than the screws provided.
Align the wall plate with your drilled holes.
The Equatech Universal TV Wall Mount comes with a [insert warranty period] warranty. For support, please contact Equatech's customer service department.
Enjoy your perfectly mounted screen.
The mount provides three mounting options, which typically refer to various tilt and position configurations. For a 100-inch TV, it’s crucial to verify the total weight of your TV does not exceed the mount's 55kg limit.
Before tightening the bolts all the way down, double-check the plate with your bubble level. Adjust if necessary, then tighten the bolts firmly until the wall plate sits flush and secure against the wall. Give it a firm tug to ensure there is zero movement. Step 4: Hang the TV and Secure the Locks
: With a 3.8mm bit for wood or 8mm masonry bit for brick/concrete.
: Position the wall bracket at your desired height. Use a spirit level to ensure it is perfectly straight, then mark the points for drilling into your wall studs. equatech universal tv wall mount 32 to 100 instructions
Summary
If your model features elongated metal screws at the very bottom of the bracket arms, take a long Phillips-head screwdriver and tighten these upward-facing screws. They will thread directly under the bottom lip of the wall plate, preventing the television from ever being accidentally bumped upward or knocked off the track. 5. Post-Installation Tips & Cable Management
: Look at the four screw holes on the back of your TV. Measure the horizontal distance between the holes first, followed by the vertical distance in millimeters. The Equatech mount Go to product viewer dialog for this item.
If you encounter any issues during installation or use, here are some troubleshooting tips: Once securely attached, check your work one last time
Hold the Equatech wall plate against the brick or concrete wall at your desired height. Use the bubble level to ensure it sits perfectly straight.
This article provides a detailed, step-by-step walkthrough of the for 32-100 inch TVs. We will cover tools required, wall compatibility, VESA patterns, step-by-step installation, cable management, and troubleshooting.
: For ideal ergonomics, the center of the television screen should sit roughly at eye level when you are seated in your primary viewing spot.