Recommended at 20–60 ppm depending on feedwater hardness and pressure. FDA Compliance:
The product is primarily hazardous due to its extreme alkalinity ( ) and corrosive nature.
: May react with and degrade certain metal storage or delivery components. nalco 77225 safety data sheet
This article is for informational purposes only. Always obtain the most current, official SDS directly from Nalco Water (Ecolab) for your specific product batch and region. Do not rely on third-party summaries for emergency response.
Nalco 77225 Safety Data Sheet (SDS): A Comprehensive Safety Guide Recommended at 20–60 ppm depending on feedwater hardness
When designing chemical feed lines, certain materials must be avoided to prevent system degradation or failure:
Direct contact with a pH 13.5 solution poses an immediate risk of severe chemical irritation or burns. Skin exposure can cause redness, drying, and localized inflammation. Splashes to the eyes are highly dangerous and can cause severe ocular damage, corneal epithelial injury, or irreversible impairment if left untreated. Inhalation Risks This article is for informational purposes only
Because the chemical has a , it is classified as a hazardous substance capable of causing severe skin burns and serious eye damage. Anyone tasked with transporting, storing, or dosing this chemical must understand its SDS parameters to maintain regulatory compliance and safeguard workplace health. Official safety data sheets can be directly requested via the Ecolab SDS Portal . Hazard Identification & GHS Classification
Modern Safety Data Sheets follow the globally harmonized system (GHS) format, which consists of 16 standardized sections. When reviewing the Nalco 77225 SDS, safety managers and operators should pay closest attention to the following critical sections: 1. Identification (Section 1)