The FS-SM100 acts as a HID (Human Interface Device) , similar to a standard USB joystick or gamepad.
| Issue | Possible Cause | Solution | | :--- | :--- | :--- | | | Corrupted or outdated drivers, loose connection, or USB port issues. | Reinstall drivers, try different USB ports and cables, disable Windows Fast Startup. | | Driver Won't Install | Interference from antivirus or missing administrator privileges. | Temporarily disable antivirus/firewall (re-enable after), run installer as administrator (right-click -> "Run as administrator"). | | Controller Not Working in Game | Game not configured to use this controller, or signal mismatch. | Remap controls in game's settings; ensure transmitter is set to appropriate PPM frame values (e.g., 22.5ms/300u-). | | Red Light Blinking Fast | Generally indicates a communication failure between the transmitter and the adapter. | Power cycle everything; recheck trainer port connection and ensure transmitter is powered on and in slave/student mode. |
The FlySky FS-SM100 Go to product viewer dialog for this item.
Which are you currently running (Windows 10, Windows 11, or Mac)? Fs-sm100 usb driver
A: Probably not. Low-level USB drivers often contain code that manipulates hardware directly, which heuristic antivirus for "PUA" (Potentially Unwanted Application) flags. Verify the hash with the manufacturer.
With the driver installed and the transmitter in the correct mode, it's time to calibrate the controls so Windows reads them accurately.
If your system fails to recognize it, manual drivers (often Silicon Labs based) may be required from the Official Flysky Website or provided software discs. Calibration: The FS-SM100 acts as a HID (Human Interface
Choose , click Browse , select the folder where you extracted the files, and click Next . Windows will manually inject the driver. How to Configure Your Simulator Software
Once your driver registers stick movements inside Windows, you can open your flight simulator of choice. The FS-SM100 is broadly compatible with both free and premium packages, including: FPVFreerider Liftoff / Velocidrone (For FPV drone racing) RealFlight (May require custom mapping profiles) PicaSim (For R/C gliders) The Calibration Process
Which are you trying to configure?
This often points to a calibration issue. First, go back to the Windows "USB Game Controllers" screen and run the calibration wizard. If the problem persists, try adjusting the PPM Frame settings in your transmitter.
The FS-SM100 is a dedicated simulator cable used to connect FlySky transmitters (like the FS-i6, FS-i6X, FS-TH9X, and more) to a PC. It converts the PPM signal from the transmitter's trainer port into a USB signal that the computer recognizes as a game controller or joystick.
Before diving into the driver, it's important to understand the hardware itself. | | Driver Won't Install | Interference from
Are you having trouble with the cable, or do you need help mapping the controls in a specific simulator? FS-SM100 USB Flight Simulator Cable, 1.5M - IndiaMART
Any radio outputting a 4–8 channel PPM signal, such as certain Futaba or JR models.