Renolink Key Card Programming -

For Renault and Dacia owners, the dreaded "Key Card Not Detected" message or the loss of a primary card used to mean an expensive trip to the dealership. However, with the Renolink OBD2 interface

Example output: Keys programmed: 2/4 | Free slots: 2

Take your original working key card (if available) and insert it into the card slot. Click or Learn Key . renolink key card programming

Insert your existing, working key card into the reader slot (if available), or hold it near the start button.

If you hear several short beeps and a red LED appears on the device during programming, it may indicate that the card is not compatible, the model is not supported by that software version, or the UCH is locked. For Renault and Dacia owners, the dreaded "Key

| Error Message | Cause | Solution | |---------------|-------|----------| | "Communication error with UCH" | Poor OBD connection or wrong model selected | Check pins, reseat cable, manually select exact model year | | "Invalid security code" | Wrong pincode or UCH is locked | Wait 10 minutes (lockout timer), then re-enter. Use a code calculator. | | "Key not recognized" | Blank key is incompatible or dead battery | Replace CR2032 battery. Use a known-good aftermarket key (e.g., JMD). | | "Maximum number of keys reached" | UCH memory full (usually 4-5 keys max) | Delete old keys first (requires "Erase Keys" function – Renolink can do this on most models) | | "Programming failed at 50%" | Voltage drop during write | Connect a 12V battery charger to the car. Laptop also on AC power. |

Go to and select the correct COM Port assigned to your OBDLink device. Insert your existing, working key card into the

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

While Renolink is famous for injector coding, DPF regeneration, and ABS bleeding, is arguably its most valuable feature. It allows you to:

Extract the necessary security code from the UCH. Clear old key cards: Remove lost cards from the system.

Click on . A new dedicated window will open. Step 4: Read the PIN Code and Delete Old Keys