Go beyond curated stations
Already using Spotify, TIDAL or Apple Music at home? Easily import your favorite playlists into your fully licensed dealership music account and stay compliant while enjoying full control.
Select for Trig. Run a female-to-female jumper wire from the sensor's Trig pin to the S pin of row 2.
is an expansion board designed to eliminate the "mess of wires" common in complex projects . It stacks directly onto an Arduino Uno or Mega, breaking out every pin into a standardized format that allows you to plug in sensors and servos like a "plug-and-play" device . Core Hardware Overview
Who it’s for
Keep the jumper and pin mapping reference nearby—most "shield not working" issues are simply the wrong voltage or a conflict on D0/D1.
Arduino Uno R3, Duemilanove, Leonardo, and Mega 2560 (uses Uno footprint).
Connecting a 3-Pin Sensor (e.g., PIR Motion, Ultrasonic, or Flame Sensor)
Dedicated headers for I2C, SPI, UART, APC220 Bluetooth/RF, and LCDs.
| Feature | Details | |-----------------------|--------------------------------------------------| | Compatibility | Arduino Uno R3, Leonardo, Mega 2560 (partial) | | Digital I/O Ports | 14 (D0 – D13), each with 3-pin connector | | Analog Input Ports | 6 (A0 – A5), each with 3-pin connector | | I2C Interface | 1 (dedicated 4-pin: SDA, SCL, VCC, GND) | | UART Interface | 1 (D0/RX, D1/TX) via separate 4-pin header | | SPI Interface | Via ICSP header (MISO, MOSI, SCK, SS on D10) | | External Power (Servo) | 5V – 12V DC via 2-pin terminal block (optional) | | Board Dimensions | Approx. 68mm x 53mm |
Already using Spotify, TIDAL or Apple Music at home? Easily import your favorite playlists into your fully licensed dealership music account and stay compliant while enjoying full control.
It only takes a few steps to get fully licensed music for your car dealership
Choose one of our plans, tell us about your company, and you're in! Explore all features for 14 days, completely free.
Choose from 500+ stations or import custom playlists from major platforms like Spotify, Apple Music, Youtube, and more.
Schedule stations, custom playlists, or mixes and get attention with promotional messaging.
You’re done! Watch as your car dealership instantly feel more inviting with professional-grade and expertly curated music
Select for Trig. Run a female-to-female jumper wire from the sensor's Trig pin to the S pin of row 2.
is an expansion board designed to eliminate the "mess of wires" common in complex projects . It stacks directly onto an Arduino Uno or Mega, breaking out every pin into a standardized format that allows you to plug in sensors and servos like a "plug-and-play" device . Core Hardware Overview
Who it’s for
Keep the jumper and pin mapping reference nearby—most "shield not working" issues are simply the wrong voltage or a conflict on D0/D1.
Arduino Uno R3, Duemilanove, Leonardo, and Mega 2560 (uses Uno footprint). arduino sensor shield v5 0 manual
Connecting a 3-Pin Sensor (e.g., PIR Motion, Ultrasonic, or Flame Sensor)
Dedicated headers for I2C, SPI, UART, APC220 Bluetooth/RF, and LCDs. Select for Trig
| Feature | Details | |-----------------------|--------------------------------------------------| | Compatibility | Arduino Uno R3, Leonardo, Mega 2560 (partial) | | Digital I/O Ports | 14 (D0 – D13), each with 3-pin connector | | Analog Input Ports | 6 (A0 – A5), each with 3-pin connector | | I2C Interface | 1 (dedicated 4-pin: SDA, SCL, VCC, GND) | | UART Interface | 1 (D0/RX, D1/TX) via separate 4-pin header | | SPI Interface | Via ICSP header (MISO, MOSI, SCK, SS on D10) | | External Power (Servo) | 5V – 12V DC via 2-pin terminal block (optional) | | Board Dimensions | Approx. 68mm x 53mm |