After the firmware installation reaches 100%, the TENDA D305 will automatically reboot itself.
If the update resets your router to factory defaults (common), you will need to reconfigure your ISP username/password, SSID, and Wi-Fi password. Always keep a backup of these settings.
Updating firmware is safe, but you must follow these rules to avoid "bricking" your router:
Navigate through your local computer folders to select the extracted .bin firmware file you downloaded in Step 1. Update Software in TENDA D305
: Enter your administrator password. The default is usually admin . 3. Perform the Update
Once the progress bar reaches 100%, the router will automatically reboot itself.
Once you are logged in, the interface is generally user-friendly. After the firmware installation reaches 100%, the TENDA
The progress bar will load, and the router will automatically reboot.
Log in using your admin credentials (default username and password are usually / admin ).
The router may have factory reset. Try logging in using the default credentials ( admin / admin ). If that fails, hold down the physical RST (Reset) button on the back of the router for 10 seconds to manually clear the cache and try again. Updating firmware is safe, but you must follow
Open a web browser and enter the default IP address: (or 192.168.1.1/192.168.2.1 depending on your specific region's model).
: Only download firmware built specifically for the TENDA D305. Installing software meant for another model or hardware version will break the device. Step 1: Download the Latest TENDA D305 Firmware