Xh-m608 Manual Jun 2026

: The load stays ON only when voltage is between 11.0V and 13.0V. If voltage goes outside this range, the relay activates and disconnects the load.

A comprehensive manual for the XH-M608 generally includes the following sections:

Enters the parameter selection menu (P1 to P3). Xh-m608 Manual

To follow this XH-M608 manual effectively, you must identify the physical components on the board.

Unlike simple resistor-based speed controls, the XH-M608 uses PWM technology. This means it rapidly switches the power on and off to the motor, maintaining torque at lower speeds and preventing the motor from overheating. : The load stays ON only when voltage is between 11

Route the positive operating wire of your load (e.g., radio, inverter, motor) through the relay's and NO terminals.

Note: The module is powered directly by the battery it is monitoring. To follow this XH-M608 manual effectively, you must

DC 6V – 60V (Commonly used for 12V and 24V batteries) Control Accuracy: 0.1V Output Type: Direct Output / Relay Switch Output Voltage Error: ±0.1V

Ensure correct polarity during installation to avoid damaging the module or the battery. Configuration Instructions