Mikrotik L2tp Server Setup Full !!top!! <HD>

Run /export compact and share the sanitized output (hide your PSK and passwords) on MikroTik forums.

This step activates the server and secures it with a pre-shared key (PSK). Go to and click L2TP Server . Check Enabled . Default Profile: Select l2tp-profile . Use IPsec: Set to required or yes .

/ppp profile add name=VPN-Profile local-address=192.168.88.1 remote-address=VPN-Pool dns-server=1.1.1.1 use-encryption=yes Use code with caution. Copied to clipboard Activate the server and enforce IPsec encryption . Navigate to PPP > L2TP Server . Enable: Checked. Default Profile: Select VPN-Profile . Use IPsec: Set to yes . IPsec Secret: Enter a strong pre-shared key (PSK) . Phase III: User Authentication (PPP Secrets) Create individual credentials for each remote user . mikrotik l2tp server setup full

L2TP is a widely used VPN protocol that allows users to establish a secure and encrypted connection to a remote network. It operates at the data link layer of the OSI model, hence the name Layer 2 Tunneling Protocol. L2TP is often used in conjunction with Internet Protocol Security (IPSec) to provide end-to-end encryption and authentication.

/ip route add dst-address=192.168.100.0/24 gateway=192.168.88.1 Run /export compact and share the sanitized output

Set the range (e.g., 192.168.88.10-192.168.88.20 ). Step 2: Configure the PPP Profile

# Check active L2TP interfaces /interface l2tp-server server print Check Enabled

Ensure the router accepts incoming VPN traffic. Add these rules to the top of your list: UDP 500, 4500: For IPsec negotiation. UDP 1701: For the L2TP tunnel. IPsec-ESP: To allow encrypted data packets. Best Practices for 2026

Ensure this range does not overlap with your existing DHCP server pool.

The profile defines the "rules" for the connection, including DNS and local gateway settings. to add a new profile. l2tp-profile Local Address 192.168.89.1